DURASHOCK TRITON ML, MN 04/2006-2015 UTE GAS REAR SHOCKS - 1 x PAIR

1. 36mm TEFLON BANDED STEEL PISTON FOR REDUCED FRICTION & GREATER DURABILITY
2. 60mm BULGED BODY FOR LARGE OIL CAPACITY (where space permits - not available on all vehicle fitments)
3. HIGH QUALITY, DURABLE, 18mm DIAMETER SHAFT
4. QUALITY TRIPLE LIP DESIGN SEAL 
5. INTERNAL NYLON MECHANICAL TOP OUT STOPS
6. ENGINEERED MULTI STAGE, VELOCITY SENSITIVE VALVING FOR GOOD COMFORT, HANDLNG, RESPONSE & CONTROL
7. SUPPLEMENTARY MOUNT WELDS FOR EXTRA DURABILITY
8. QUALITY HEAVY DUTY RUBBER BUSHINGS FOR ADDED RIDE COMFORT & LESS NVH
9. VERY DURABLE SHOCKS WITH 2.5mm THICK INNER TUBE & 2.5mm THICK OUTER BODY CASING OFFERING GREAT DURABILITY IN ALL CONDITIONS & EXCELLENT VALUE FOR MONEY!

DURASHOCK GAS SHOCK ABSORBERS – PREVIOUSLY SUPPLIED IN AUST. & EXPORTED AS  LOVELLS SERIES 2 GAS LEGEND SHOCKS  SINCE JUNE 2008 WITH GREAT RESULTS.

 

There’s only one reason we would choose to continue with this product for so long.  It offers the best value for money for such an economical price and with great warranty as well – a whopping 3 YEAR / 60,000K to the original purchaser, giving peace of mind to all our customers.

 

The DURASHOCK Twin-Tube Gas Charged shock absorbers offer a higher quality and level of performance than most other shocks offered within $450.00-$550.00 per set 4, price point.

 

FOR EVEN MORE INFORMATION SEE HERE:   https://docs.wixstatic.com/ugd/2d2ee8_71488f2e4d2746f0a2358ffbcdd0ffff.pdf

3 YEAR / 60,000Klm WARRANTY to original purchaser only

From a safety point of view, 90% of all brands of shock absorbers should be replaced or overhauled at least every 100-120,000k under most normal driving conditions if you expect them to maintain a reasonable level of vehicle control, especially in an emergence reaction situation to avoid a possible accident.
 

In some cases they may need to be replaced even sooner if used in our harsh outback conditions, corrugated tracks or with heavy rate coils and heavy loads under 4WD vehicles.

 

SHOCK FACTS:

• Shock absorber fluid becomes thinner over time (just like your engine oil), due to condensation build up over time from the typical cold-hot-cold life cycle of all shock absorbers.
• The internal, moving parts also wear over time and eventually loose their correct tolerances. All of this means that most shocks will not be performing at anywhere near their optimum (as new performance or control) after around 80-120,000k.
• This is the reason that shock absorbers should be replaced at regular intervals to maintain that safety edge for you and the passengers in your 4WD, (your family in most cases, we would think).
• Remember that it is your shock absorbers that keep your tyres in contact with the road and maintain stability of your vehicle, especially under unforeseen situations that require a fast response to avoid objects or to provide the shortest possible braking distances to avoid crashing your 4x4 !

 

There are only two other components on your 4WD that are as important or more important than good, well performing shock absorbers – BRAKES and TYRES and you need to maintain those in excellent condition as well !

• Note – We try to use actual product images of the items we sell but some images may be indicative only and may vary from the actual product part number described!

Questions? - call us on 0406 476 840 or email us at info@4wddirect.com.au

* OUR FREE SHIPPING* OFFER EXCLUDES SOME OUTER REGIONAL & ALL REMOTE AREAS OF ALL STATES:

• ALL OF NORTHERN TERRITORY EXCEPT DARWIN METRO
• ALL AREAS OUTSIDE OF THE GREATER PERTH METRO REGIONS OF WESTERN AUSTRALIA
• SOME AREAS OF FAR NORTH QLD., NORTH OF THE CAIRNS NORTHERN BEACHES.
• NOTE: REGIONAL AND REMOTE AREAS OF QUEENSLAND ONLY CAN NORMALLY BE SERVICED REASONABLY CHEAPLY BY AUST POST IF UNDER 22KG TOTAL ORDER WEIGHT WEIGHT!

If you are located in one of these areas, a Freight Surcharge will be applicable on deliveries to those areas. We can quote the Freight Surcharge for your order, prior to shipment or payment, if req'd.!