PLEASE CONTACT US DIRECTLY BEFORE PURCHASING THIS ITEM !!
WE HAVE VERY RECENTLY FOUND THAT DODGE HAVE MADE SOME ADDITIONAL WELDING & PLATING CHANGES AROUND THE REAR (UPPER) BUMP STOP AREA WHERE OUR CURRENT LA-134 TOP MOUNT BRACKET FITS.
These new additional Plate & Welds can be seen in the Bump Stop Photo shown with RED ARROWS pointing to the changed areas of the chassis.
If your RAM 1500 'DT' does NOT have these recent extra changes then this currently listed LA-134ABKIT WILL FIT - BOLT-IN, NO DRILL as previously on all earlier DT Models...
If your vehicle has these new changes, the R & D Guys are currrently working towards a possible rectification to allow our Kits to fit in the very near future...
Feel free to Call us on 0406 476 840 / 1300 881 481 to confirm...
BOSS LOAD ASSIST COMPLETE 'EXTRA HEAVY DUTY' AIR BAG KIT suit ALL RAM 1500 SERIES 'D.T. MODEL' 4WD PICK UP & UTE - 03/2021 ONWARD as Imported by RAM TRUCKS Australia (R.T.A.) & ALL Fully Imported USA Ram 1500 D.T. Models from MID 2020+ (Not R.T.A.).
* D.T. MODELS have BUMP STOP HOLES In Line - SIDE TO SIDE -
( LEFT & RIGHT ). !
* WILL NOT FIT the Earlier D.S. MODEL RAM 1500 FROM (Approx.) 2009 Onward (Approx.)
* ALL D.S. MODELS REQUIRE BOSS AIR BAG KIT # LA-73ABKIT - ALSO AVAILABLE!
This Kit is a BOLT-IN, 'NO DRILL' KIT & suits ALL STANDARD HEIGHT upto PLUS 2"/40-50mm RAISED Height Pick Ups ONLY.
The Kit fits 'BESIDE' the Rear Coils as a completely seperate unit and works in addition to and seperate from the Coil Springs as per the above fitment photo...
NOTE: This Kit uses the Larger, Higher Capacity 2600 SERIES AIR BAGS for Max. Load Carrying Capacity
This kit offers NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself.
All Boss Brackets and Plates are manufactured from 6mm thick material for extra strength.
BOSS Air Bags are incredibly strong and robust allowing them to last for years with correct installation and usage.
- Support wires - 9 high tensile central, 4 each end.
- Cured natural rubber.
- Ballistic woven reinforcing.
- 6mm Zinc plated steel end caps
- Burst Pressure - Over 750psi.
- Independent Test Pressure - 480psi
- Recommended working range: 5 - 60psi, 100psi absolute max. reco'd. pressure on good tarmac roads.
- Boss airbags have a recommended test pressure of 480psi. That meets the pressure vessel industry guidelines of 3 times the maximum working pressure.
- BOSS airbags are undeniably the Strongest in the automotive industry and exceed any other airbag brands by nearly DOUBLE
An Average Mid-sized Ute will run around 5-45psi depending on load.
Boss Extreme Series II Airbags are rated at 2600lb or 1186kg per side and have been government approved tested to over 750psi
All Boss airbags are manufactured by Boss and are branded Boss. Beware of unbranded airbags, usually coming from China from other companies.
To get the best performance from your kit inflate airbags just enough to achieve a level ride height when Loaded .
By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicle's suspension.
BOSS AIRBAG LOAD ASSIST KIT - RAM 1500 D.T. MODEL UTES 03/2021 ONWARD (R.T.A.)
BOSS LOAD ASSIST COMPLETE AIR BAG KIT suit RAM 1500 - ALL D.T. MODELS 03/2021+ PICK UPS & UTES as imported by R.T.A.
This Kit suits ALL STANDARD HEIGHT upto PLUS 2"/40-50mm RAISED Height Utes.
Does NOT fit D.S. Models!